– My Most Valuable Advice

Posted by

Shield Your Garage Flooring Against Damage With the Correct Protective Layer

Regardless of if you utilize your garage only for vehicle storage or as a workshop, it is essential to safeguard the concrete flooring from degradation. When left uncoated, garage flooring can rapidly break down from things like oil and chemical leaks, tire marks, and general use and tear. Among the best ways to protect and enhance a garage floor is through applying an epoxy or polyaspartic covering.

Garage Force is a renowned manufacturer that creates high-quality protective layers specially formulated for garage flooring. After reviewing dozens of Garage Force reviews online, a few products stood out as top performers for safeguarding and enhancing the visual appeal of any garage flooring:

The Garage Force Epoxy Protective Layer Kit is a two-component 100% solids epoxy system that offers a durable, chemical-resistant, and aesthetically-pleasing finish. The low-odor epoxy dries rapidly to form a hard, glossy surface that resists stains, abrasions, and impacts. It’s suitable for both residential and commercial uses. Installation is straightforward with the kit’s step-by-step instructions.

For faster-drying protection, consider the Garage Force Polyaspartic Protective Layer. This single-component covering cures within 2-4 hours, allowing you to employ your garage sooner than with traditional epoxy. It also provides superior UV resistance and color retention compared to other polyaspartic protective layers on the market. The non-yellowing formula maintains a bright, glossy look for years.

Regardless of which protective layer you choose, suitable surface planning is crucial for long-lasting effects. Sweep and vacuum to eliminate all loose debris. Then etch or grind the concrete to develop texture for improved adhesion. This is particularly important for older flooring with present protective layers or sealants. After etching, completely clean the floor to remove all residue and permit it to entirely dry before application.

For application, both the Garage Force epoxy and polyaspartic garage floor coating come with detailed instructions. In general, you’ll want to pour the resin component onto the floor in ribbons and spread it evenly with a notched squeegee. Back-roll the material with a non-shedding roller to work it into all the pores and crevices of the concrete.

Be sure to apply the Garage Force garage floor coating within the appropriate temperature range, usually between 50-90F. Too cold or hot and it won’t cure properly. Also work in sections you can coat within the pot life window before material starts to set up. An extra set of helping hands makes application go much smoother. Allow full cure times of 12-24 hours before moving vehicles or equipment back in.

With the right Garage Force garage floor coating, you’ll enjoy a glossy, stain-resistant surface that’s easy to clean. No more unsightly oil spots or tire imprints marring the concrete. The non-slip texture provides traction too. Periodic sweeping is usually all that’s needed to maintain the like-new look for many years. Recoat only when the protective layer wears thin rather than stripping and starting over.

Recommended reference: https://www.angi.com/companylist/us/tx/houston/garage-force-of-north-and-central-houston-reviews-10063487.htm